(b) For metallic components, compliance with paragraph (a) of this section may be shown by—
(1) Bonding the components properly to the airframe; or
(2) Designing the components so that a strike will not endanger the airplane.
(c) For nonmetallic components, compliance with paragraph (a) of this section may be shown by—
(1) Designing the components to minimize the effect of a strike; or
(2) Incorporating acceptable means of diverting the resulting electrical current so as not to endanger the airplane.
[Amdt. 25–23, 35 FR 5674, Apr. 8, 1970]
NEXT: Sec. 25.601 - General.
PREVIOUS: Sec. 25.571 - Damage—tolerance and fatigue evaluation of structure.