Federal Aviation Regulations
Sec. 135.299 — Pilot in command: Line checks: Routes and airports.
(a) No certificate holder may use a pilot, nor may any person serve, as a pilot in command of a flight unless, since the beginning of the 12th calendar month before that service, that pilot has passed a flight check in one of the types of aircraft which that pilot is to fly. The flight check shall—(1) Be given by an approved check pilot or by the Administrator;
(2) Consist of at least one flight over one route segment; and
(3) Include takeoffs and landings at one or more representative airports. In addition to the requirements of this paragraph, for a pilot authorized to conduct IFR operations, at least one flight shall be flown over a civil airway, an approved off-airway route, or a portion of either of them.
(b) The pilot who conducts the check shall determine whether the pilot being checked satisfactorily performs the duties and responsibilities of a pilot in command in operations under this part, and shall so certify in the pilot training record.
(c) Each certificate holder shall establish in the manual required by §135.21 a procedure which will ensure that each pilot who has not flown over a route and into an airport within the preceding 90 days will, before beginning the flight, become familiar with all available information required for the safe operation of that flight.
NEXT: Sec. 135.301 - Crewmember: Tests and checks, grace provisions, training to accepted standards.
PREVIOUS: Sec. 135.297 - Pilot in command: Instrument proficiency check requirements.